如果長時間使用廚房，磚墻上會形成粘性污漬，難以用去污洗滌劑徹底。有一種方法可以輕松地墻壁上的煙霧。準備洗滌劑，醋，開水，混合三者，攪拌均勻。取一塊干凈的抹布，浸入混合溶劑中。完全浸泡后，將其取出并擰到半干。用抹布上的溶劑覆蓋墻磚上的油漬，窒息一會兒，然后擦拭廚房瓷磚。以這種方式清洗墻壁，油漬很容易去除，值得排煙罩廠家提醒的是，你必須用開水。

　　If you use the kitchen for a long time, sticky stains will form on the brick wall, which is difficult to remove thoroughly with detergent. There is a way to remove the smoke from the walls easily. Prepare detergent, vinegar, boiling water and mix them well. Take a clean cloth and soak it in a mixture of solvents. After soaking completely, take it out and screw it to half dry. Cover the grease stains on the wall tiles with the solvent on the rag, suffocate for a while, and then wipe the kitchen tiles. Cleaning the walls in this way can remove grease stains easily. It is worth reminding smoke hood manufacturers that you must use boiling water.

　　排煙罩廠家

　　Smoke hood manufacturer

　　對于山東廚房煙霧和餐飲業的廚房來說，排氣是否順暢與廚房能否正常工作直接相關。煙氣的凈化僅是凈化廚房排氣系統中的空氣的強制性功能。排氣系統和凈化器的合理匹配是確保煙塵凈化器凈化效率的關鍵，也是一個容易忽視煙塵凈化器設計的問題。如果排氣系統的設計不合理，整個廚房都不會耗盡。即使安裝了油煙凈化器，煙霧也無法安裝油煙凈化器。

　　For the kitchens of Shandong kitchen smoke and catering industry, the smoothness of exhaust is directly related to the normal work of the kitchen. The purification of flue gas is only a compulsory function to purify the air in the kitchen exhaust system. Reasonable matching of exhaust system and purifier is the key to ensure the purifying efficiency of dust purifier, and it is also a problem that is easy to ignore the design of dust purifier. If the exhaust system is not designed properly, the whole kitchen will not be exhausted. Even if the fume purifier is installed, the fume purifier can not be installed.

　　排煙罩由蓋體和蓋子的上部和下部組成。蓋體由三個平面組成，蓋子由前，后，左，右四個平面（或擋板）組成，形成一個圓錐體。錐體的下端與蓋體連接，上端與抽油煙機連接，活動擋板在蓋體兩側或靠近窗口的蓋子上打開，前擋板有凹口美觀精致，油煙完全耗盡，污染不污染。環境，山東排煙罩廠家對人體健康有益，結構簡單，成本低。

　　The exhaust hood is composed of a cover body and the upper and lower parts of the cover. The cover body consists of three planes. The cover consists of four planes (or baffles) of front, rear, left and right, forming a cone. The lower end of the cone is connected with the cover body, and the upper end is connected with the hood. The movable baffle is opened on both sides of the cover body or on the cover near the window. The front baffle has a concave and exquisite appearance. The soot is completely exhausted and the pollution is not polluted. Environment, Shandong smoke hood manufacturer is beneficial to human health, simple structure, low cost.

　　裝有洗滌液的水由水泵加壓并送到罩子噴射成扇形。來自罩底部的油氣在與扇形水面接觸的情況下被凈化和凈化，水被氣液分離風扇分離，然后回流。水缸。這是水罩的基本工作原理。水罩有一套完整的污水，水，洗滌液，循環等自動控制系統，操作和使用方便。通過罩凈化后的氣體脫氣率可達到約90％，并且管道不再被污染。由于水霧的隔離效果，罩具有一定的防火功能。

　　The water containing the washing liquid is pressurized by the pump and injected into the hood to form a fan. Oil and gas from the bottom of the hood are purified and purified in contact with the fan-shaped water surface. Water is separated by a gas-liquid separation fan and then refluxed. Water tank. This is the basic working principle of the water cover. The water cover has a complete set of automatic control systems for sewage, water, washing liquid, circulation, etc. It is easy to operate and use. The degassing rate of the purified gas can reach about 90%, and the pipeline is no longer polluted. Because of the isolation effect of water mist, the cover has certain fire protection function.

　　以上就是濟南排煙罩的相關介紹，更多相關內容點擊咨詢：http://heblc.com/

　　The above is the introduction of the smoke hood in Jinan. For more information, click on http://heblc.com/